Dillon EDXtreme (Old) Manual do Utilizador descarregar pdf (Página 32)

32 EDxtreme User Instructions

There are three soft keys on the first display and four on the second display. The soft

key functions are described below:

Units Changes the displayed unit of measure. Each press advances the display

through this sequence; lbf, kgf, N, custom 1, custom 2.

Print Outputs serial data to peripheral devices attached to COM 1.

C.All Clears the peaks on all EDXs currently in communication with the remote.

Clear Clears the current peak value of the active EDX.

UZ.All Resets all EDXs to calibration zero reference point.

Z.All Zeros all EDXs currently in communication with the remote.

Setup Accesses the Setup menu shown in Figure 6.1.

Config Accesses the Config menu shown in Figure 6.2.

6.2 Communicator Setup Menu

The Communicator Setup menu can be accessed using the softkey or the Remote

Setup hardkey.

Figure 6.1 Communicator Setup menu

Ptfmt Select from print formats 1-7. See Communicator Print Formats on page

35.

Ntwrk Setup the network.

First choice is Radio Channel #. Can pick 1-64. All EDXs set to this same

number will communicate with this Communicator.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 49 50

Sem comentários

Dillon EDXtreme (Old) Manual do Utilizador Página 32